Popular Posts

Showing posts with label Interview Question and Answers. Show all posts
Showing posts with label Interview Question and Answers. Show all posts

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 1)


Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 1)


Question1: Is it possible to start up a 36w or 40w 220V AC/DC tube light without the help of Coil or Choke?

Answer 1: It is not possible without the help of electric coil or choke. Because, the coil or choke ionize the particles in the tube light. In normal voltage it is not possible to ionize the particle.


Question2: What is the difference between three point and four point starters?

Answer 2:  In the four point starter the line and Shunt are connected separately. In the three point starter the line and shunt are connected in same. This is one of the advantages of three point starter.


Question 3: What types of resistance is used in bulbs or tube lights? What will happen if a 220volt AC operated bulb or device run by the 220volt DC?

Answer 3:  The AC operated Bulb or device has a very low resistance. But, the devices whose are designed for AC offers high impedance to the supply. When the DC voltage is applied to the AC devices, the passing DC current is very high due to the low resistance of the device. This high voltage may damage the device.


Question 4: What do you mean by electric traction?

Answer 4: Electric Traction means running a machine by using electric energy or power. Electrical energy, energies the traction system. Basically DC motors are used in traction system. Now electric traction system widely used in trams, trolleys, industries, railways .Bullet train is also running by the magnetic traction, magnetism is setup by the electric energy in the bullet train.


Question 5: Why the capacitor works doesn’t work on DC?

Answer 5: The capacitor normally gives an infinite resistance to DC component. But, it allows AC power component to pass through the devices. These resistances of the capacitor blocks work of DC component.

Thanks for your time.Hope we will give more important questions and answers for interview very soon.Please subscribed to RSS feed or Email feed.

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 6)


Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 6)

 In this topic we know about different types of motors starting torque and current, rheostat position, role of armature reaction, stepper motor, KVAR.

 Question: In the synchronous motor, DC motor or Induction motor which types of the motor has the high starting torque and starting current? What are the load criteria for those motors on the starting condition?

Answer:  From these motors the starting torque is present at the DC motor.

The load criteria for the starting conditions are as follows,
·        The DC series motor can not start without the presence of the load.
·        The synchronous motor and Induction motor can not start at the presence of load.


Question:  In the motors starting purpose why the armature rheostats at maximum position while the field rheostat is kept in minimum position? 

Answer:  in the time of starting a motor the field rheostat is kept in minimum state for the high starting torque.

In the time of starting a motor the armature rheostats is used to control or reduce the high starting current. This high starting current can damage the motors starting systems.

Question: What are the types of power in electrical power?

Answer:   There are normally three types of power are counted in electrical power. They are,

·        Apparent power
  • Active power
  • Reactive power

Question:  What does the KVAR means?

Answer: The KVAR indicates the electrical power. KVAR means

                   “Kilo Volt Amperes with Reactive components”

 Question: In the magnetic fluxes, what is the role of armature reaction?

Answer:  The armature flux plays an important role for the running condition. This armature flux can oppose the main flux or it may support the main flux for better running condition. This effect of supporting and opposing of main flux to armature flux is called armature reaction.

 Question: What do you understand by the two phase motor? Give us one example.

 Answer: The motor which have a phase split in the running and starting winding is called as a two phase motor.

Example: Servo motor is one types of two phase motor. In the servo motor there is phase difference of 90 degree between control winding and auxiliary winding.

 Question:  Define stepper motor. What is the use of stepper motor?


Answer: The motor which work or act on the applied input pulse in it, is called as stepper motor.
This stepper motor is under the category of synchronous motor, which does not fully depend of complete cycle. It likes to works in either direction related to steps. for this purpose it mainly used in automation parts.



-- - - - -- --- - -- - - -- - - - -- -  -- - - - - -  -- - - - -- - - - - - - - - 
We will give more important questions and answers for electrical engineering interview very soon. Please subscribed to RSS feed or Email feed. We need your help for the betterment of the site. Please give comments and tell us what’s your opinions and needs from us. We will try to give your required things.

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 7)


Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 7)

In this topic we know about the Power Factor, the leading and lagging condition for the power factor, the disadvantage of the low Power Factor and the main causes of the low power factor.

 Question: What is Power Factor?

 Answer: In an a.c. circuit the cosine of angle between voltage and current is called as power factor.

power factor improvement vivasolve.blogspot.com
Fig: Power factor angles

 Question: What are the leading and lagging conditions in the power factor improvement?

 Answer: Normally there are two types of circuit, capacitive and inductive circuits.

·        In the capacitive circuits, current leads the voltage and power factor is called as leading.
·        In the inductive circuits, current lags behinds the voltage and power factor is called as lagging.

Question: What are the disadvantages of low power factor?

 Answer: The main disadvantages of low power factor are as follows,

1.     Large size of the Conductor.
2.     Large Kilo Volt Ampere rating of the electrical machinery or equipment.
3.     Poor or unaccepted voltage regulations.
4.     A big amount of Copper loss.
5.     The handling capacity of the system reduced.

Question: What are the main causes of the low power factor?

 Answer: In the supply system normally the power factor is lower then 0.8 for the overall load. Low Power factor is very undesirable, because it hampers the economic parameters for the power generation and distribution. Now, some short important causes are as follows,

·        In the low lagging factor some electrical equipment such as electric discharge lamps, Arc lamps and the industrial heating furnaces are running.
·        The power factor is also depending on the load conditions. The load is varying time to time.  The supply voltage is increasing in the low load period which increases the amount of the magnetization current. This magnetizing current is resulting in the decreased power factor.
·        The single phase and three phase ac motors have low lagging power factor and they are induction type also. The power factor is varying for these types of motor. It can run from 0.2 to 0.9 values depends on load. In the heavy load the power factor can be 0.8 or 0.9 and in the light load the power factor can be 0.2 to 0.3.


-- - - - -- --- - -- - - -- - - - -- -  -- - - - - -  -- - - - -- - - - - - - - - 
We will give more important questions and answers for electrical engineering interview very soon. Please subscribed to RSS feed or Email feed. We need your help for the betterment of the site. Please give comments and tell us what’s your opinions and needs from us. We will try to give your required things.

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 9)

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 9)

In this topic we will know about motor protection

In the nameplate of the motor we see IP XY . i.e. IP 55
Example: With the IP rating IP 23, 

  • 2 describes the level of protection from solid objects and 
  • 3 describes the level of protection from liquids.

IP stands for 

Ingress Protection Ratings

 IP rating normally has two (or three) numbers:

  1. Protection from solid objects or materials
  2. Protection from liquids (water)
  3. Protection against mechanical impact 

specifying the environmental protection the enclosure provides.
Ingress Protection (IP) ratings are Introduced by the European Committee for Electro Technical Standardization .

 NEMA IEC 60529 Degrees of Protection Provided by Enclosures - IP Code,


IP First number - Indicates the Protection against solid objects. Which we indicates as X in the example

0 No special protection
1 Protected against solid objects over 50 mm, e.g. accidental touch by persons hands.
2 Protected against solid objects over 12 mm, e.g. persons fingers.
3 Protected against solid objects over 2.5 mm (tools and wires).
4 Protected against solid objects over 1 mm (tools, wires, and small wires).
5 Protected against dust limited ingress (no harmful deposit).
6 Totally protected against dust.

IP Second number -Indicates the Protection against liquids.Which we indicates as Y in the example 

0 No protection.
1 Protection against vertically falling drops of water e.g. condensation.
2 Protection against direct sprays of water up to 15o from the vertical.
3 Protected against direct sprays of water up to 60o from the vertical.
4 Protection against water sprayed from all directions - limited ingress permitted.
5 Protected against low pressure jets of water from all directions - limited ingress.
6 Protected against temporary flooding of water, e.g. for use on ship decks - limited ingress permitted.
7 Protected against the effect of immersion between 15 cm and 1 m.
8 Protects against long periods of immersion under pressure.



Example - IP 35

An electrical socket rated IP22 is protected against

  • Protected against solid objects over 2.5 mm (tools and wires).
  • Protected against low pressure jets of water from all directions - limited ingress.
IP stands for  Ingress Protection Ratings www.vivasolve.blogspot.com
IP stands for 
Ingress Protection Ratings

IP Third number - Indicates the Protection against mechanical impacts .

Its not used in normal cases. 

the third number is not available in IEC 60529

0 No protection.
1 Protects against impact of 0.225 joule
(e.g. 150 g weight falling from 15 cm height).
2 Protected against impact of 0.375 joule
(e.g. 250 g weight falling from 15 cm height).
3 Protected against impact of 0.5 joule
(e.g. 250 g weight falling from 20 cm height).
4 Protected against impact of 2.0 joule
(e.g. 500 g weight falling from 40 cm height).
5 Protected against impact of 6.0 joule
(e.g. 1.5 kg weight falling from 40 cm height).
6 Protected against impact of 20.0 joule
(e.g. 5 kg weight falling from 40 cm height).


We will give more important questions and answers for electrical engineering interview very soon. Please subscribed to RSS feed or Email feed. We need your help for the betterment of the site. Please give comments and tell us what’s your opinions and needs from us. We will try to give your required things.

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 5)

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 5)

In this topic we will find some question about unit cell in crystallization, circuit breaker and its properties, advantage of circuit breaker over fuse and switches, Arc voltage, re-striking voltage, recovery voltage.

 Question: What is unit cell in crystallization?

 Answer: The small cell which is most convenient in the crystal and carries all the properties and nature of the crystal is called unit cell. In the three dimensional system the repetitions of unit cell creates a whole structure of crystal.

Question: What is circuit breaker? What are the properties of circuit breaker?

 Answer: A circuit breaker is a piece of equipment which can save devices from faults by using moving or fixed contacts, called as electrodes.

The main the properties of circuit breaker are,

·        Make a circuit by remote control or manually under fault conditions.
·        Under a fault condition break a circuit automatically.
·        Make or break a circuit by remote control or manually under normal conditions.

Question: What is the advantage of circuit breaker over fuse and switches? What are the disadvantage of fuse and switches?

 Answer: The fuse and switches are connected in series with the circuits. So the problems are as follows,

·        The switches take quite sometimes for replacement and restore the power supply to the users, when it blows up.
·        The fuse can not successfully block or interrupt a heavy current due to its series connectivity, which may damage the high capacity circuits.

Due to this disadvantages circuit breaker used over fuse and switches.

Question:  What is Arc voltage?

 Answer:   During the arcing period the voltage that appears across the contacts of the circuit breaker is called arc voltage.

Question: What is re-striking voltage?

 Answer:  During the arcing period this is the transient voltage, which appears across the contacts at or near current zero is called as restriking voltage.

Question:  What is recovery voltage?

 Answer: After final arc extinction it is the normal arc frequency (50 Hz) root mean square (r.m.s) voltage that appears across the circuit breaker is called recovery voltage. The system voltage and recovery voltage are approximately equal.


-- - - - -- --- - -- - - -- - - - -- -  -- - - - - -  -- - - - -- - - - - - - - - 
We will give more important questions and answers for electrical engineering interview very soon. Please subscribed to RSS feed or Email feed. We need your help for the betterment of the site. Please give comments and tell us what’s your opinions and needs from us. We will try to give your required things.


Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 4)


Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 4)

In this Part we find some question about Crystallization

Question: What do you understand by a crystal?

 Answer: A three dimensional periodic arrangement of molecules, atoms, or ions is called as crystal. In the crystal structure degree of symmetry and periodicity is most important. For the crystal structure the orientation of neighbors and their numbers are clearly mentioned.


Question:  What is crystallization?

 Answer: The process by which crystals of a substance are formed another phase of that substance is called as crystallization. Crystallization needs (10^3- 10^4) number of atoms or molecule of the substance. The nucleation process for the crystallization is increasing by the atomic diffusion from the vapor or the melt.

Question: What is crystalline solid? What are the most important properties of crystalline solid?

 Answer: Crystalline Solid is a solid in which atom or molecules are arranged in a periodic arrangement to form a long range order.

Or,

A Crystalline solid is a solid in which atoms bond with each other in a regular pattern to form periodic collection.

The most important properties of crystalline solid are,
·        Periodicity
·        Long range order


Question:  Describe the Crystalline solid in terms of lattice and basis. What are the lattice parameters? When we have the chance to find the actual crystal structure?

 Answer: For describing the Crystalline solid,

Lattice: A lattice is an infinite periodic array of geometric points in space without atom.

Or,

A lattice is a regular array of points in space with a discernible periodicity.  In three dimensional spaces there are possibilities of 14 distinct lattices. When at each lattice points an atom or molecule is placed, the resulting regular structure is called a crystal structure.

The lattice has two parameters mainly. They are,
1.     The angle between the sides of unit cell
2.     The lengths of the side of the unit cell.

Basis:  The identical group of atom or molecules that are placed at each lattice points is called basis.

Or,
A molecule, a collection of molecules or an atoms placement at each lattice point to generate the crystal structure of a substance truly is known as basis.   

          When we place identical group of atoms or molecules at each lattice points then we find the actual crystal structure.


Question:  who are the inventors of transistors? When they get Nobel Prize?


Answer: The inventors are,

1.     William Shockley
2.     John Bardeen
3.     Walter Brattain

They get Nobel prizes in 1956.

-- - - - -- --- - -- - - -- - - - -- -  -- - - - - -  -- - - - -- - - - - - - - - 
We will give more important questions and answers for electrical engineering interview very soon. Please subscribed to RSS feed or Email feed. We need your help for the betterment of the site. Please give comments and tell us what’s your opinions and needs from us. We will try to give your required things.



Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 3)

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 3)


In this topic we know about ,electric supply system,electric supply system classification and principle components,components are used for dc to ac convert or ac to dc convert

Question 10: What is electric supply system?

Answer 10:  Electric supply system: The process of transporting or conveyance of  electrical energy or power from a power station to the users premises (home, industry etc) is called as electric supply system.

Question 11:  What are the electric supply system classification and principle components?

Answer 11: The electric supply system can be classified into two types:

                   і)  AC or DC supplies system.
                   ii) Underground or Overhead Supply system.

In the electric supply system the 3 phase 3 wire system is used for AC energy generation and transmission. In the distribution system three phase four wires is used now a days. This system is now used all over the world.

In the underground system tunnels are used and in overhead system poles are used.


Question 12:  Which components are used for dc to ac convert or ac to dc convert? What is the operation range of these devices? What is present day’s trend for generation and transmission?

Answer 12:  The high voltage dc transmission is much better than the high voltage ac transmission. So, now the electrical engineers grow interest for transmission of dc in place of ac.

The use of Mercury arc rectifiers and thyratron gives opportunities of converting a.c into d.c and the conversion of dc to ac to the electrical engineers.


Electrical engineering | vivasolve.blogspot.com
Figure: One line diagram for the high voltage dc transmission



In the given one line diagram the electrical power is generated as ac and stepped up to high voltage by the help of stepper transformer. Then this high voltage energy is transferred to the Mercury arc rectifiers, which change ac to dc. After that time this high voltage dc is passed through the thyratron, this thyratron convert dc to ac again. After that this high voltage is stepped down to low voltage in receiving transformer.

The operation range of such devices is up to 30MW at 400KV in one single unit.

The present trend is using ac for generation and distribution.  And the dc is used for high voltage transmission.



----------------------------------------------------------------------

Thanks for your time. Hope we will give more important questions and answers for interview very soon. Please subscribed to RSS feed or Email feed.

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 2)

Electronics and Electrical Engineering interview Question and Answers for fresh engineers (Part 2)


In this topic we will find some question about transmission voltage, regulator difference, motor type of fans, unit of electrical energy

Question 6: What are the advantages of high transmission voltage? What are the limitations of the high transmission voltage?


Answer 6:  Advantage of high transmission voltage:
                  
1. It reduces the volume of conductor material.
                   2. It increases the transmission efficiency.
                   3. It decreases the line drop percentage.

       Limitations of high transmission voltage:

1.The insulation cost of the conductor increased.
2.The other terminal operators, switchgear and transformers cost is increasing.

Question 7:    Which is better between electrical rheostat regulator and electronic regulator for fans? Which is the basic component difference for them?


Answer 7: The electronic regulator is better then electrical rheostat regulator. In electronic regulator the power loss is very low. The electronic regulator only transfers the necessary power for the necessary speed of the fans. But in electrical rheostat regulator the power loss is same for every speed, so no power is saved.

The electronic regulator use TRIAC for speed control by varying the firing angle speed.
 The electrical rheostat regulator use control resistance, which is increased or decreased by the variation of speed.

Question 8: In our normal household fans (such as exhaust fan, pedestal fan, ceiling fan, table fan etc) which types of motor is used? What is the rotor type and starting type normally?


Answer 8:  In our normal household fans single phase induction motor is normally used.
The rotors are mostly squirrel cage rotor. The fans are normally capacitor start and run.



Question 9:  Which is the unit of electrical energy?


Answer 9: Answer: the unit of electrical energy is joule or watt-second  

Electrical energy in joule or watt-second  
= voltage in volts* current in amperes* time in seconds.

Joule or watt-second is very small for the measuring of electrical energy in the practical field purpose.

1 watt-hour = 1watt * 1 hour
                   = 1watt * 3600 seconds
                   = 3600 watt-sec
1 kilowatt-hour = 1kW * 1hr
                =1000watt* 3600 sec

--------------------------------------------------------------------------------------------------------

Thanks for your time. Hope we will give more important questions and answers for interview very soon. Please subscribed to RSS feed or Email feed.